[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.79.x86_64.1 (jenkins@blocks) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Mon Jul 31 15:14:40 PDT 2017 [ 0.000000] Command line: initrd=initrd.gz reason=normal BOOT_IMAGE=kernel [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Disabled fast string operations [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'lazy' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007feaffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007feb0000-0x000000007febdfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007febe000-0x000000007feeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080014 07/26/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7feb0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] BRK [0x090e7000, 0x090e7fff] PGTABLE [ 0.000000] BRK [0x090e8000, 0x090e8fff] PGTABLE [ 0.000000] BRK [0x090e9000, 0x090e9fff] PGTABLE [ 0.000000] BRK [0x090ea000, 0x090eafff] PGTABLE [ 0.000000] BRK [0x090eb000, 0x090ebfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x7fa94000-0x7feaffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F9C00 000014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 0x000000007FEB0000 000038 (v01 A M I OEMRSDT 07001026 MSFT 00000097) [ 0.000000] ACPI: FACP 0x000000007FEB0200 000084 (v02 A M I OEMFACP 07001026 MSFT 00000097) [ 0.000000] ACPI: DSDT 0x000000007FEB0440 005B7A (v01 1ADHK 1ADHK007 00000007 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000007FEBE000 000040 [ 0.000000] ACPI: APIC 0x000000007FEB0390 00006C (v01 A M I OEMAPIC 07001026 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x000000007FEB0400 00003C (v01 A M I OEMMCFG 07001026 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x000000007FEBE040 000060 (v01 A M I AMI_OEM 07001026 MSFT 00000097) [ 0.000000] ACPI: GSCI 0x000000007FEBE0A0 002024 (v01 A M I GMCHSCI 07001026 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007feaffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007feaffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007feaffff] [ 0.000000] On node 0 totalpages: 523851 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8123 pages used for memmap [ 0.000000] DMA32 zone: 519856 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0x7ff00000-0x7fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88007f800000 s85912 r8192 d28776 u524288 [ 0.000000] pcpu-alloc: s85912 r8192 d28776 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515643 [ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200 hpet=disable initrd=initrd.gz reason=normal BOOT_IMAGE=kernel [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 2037356K/2095404K available (10610K kernel code, 983K rwdata, 4076K rodata, 852K init, 724K bss, 58048K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:4352 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1795.421 MHz processor [ 0.001013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.84 BogoMIPS (lpj=1795421) [ 0.001017] pid_max: default: 32768 minimum: 301 [ 0.001024] ACPI: Core revision 20150930 [ 0.005549] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.005573] Security Framework initialized [ 0.005587] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.005590] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.005899] Initializing cgroup subsys io [ 0.005906] Initializing cgroup subsys memory [ 0.005917] Initializing cgroup subsys devices [ 0.005921] Initializing cgroup subsys freezer [ 0.005925] Initializing cgroup subsys net_cls [ 0.005928] Initializing cgroup subsys perf_event [ 0.005932] Initializing cgroup subsys net_prio [ 0.005937] Initializing cgroup subsys pids [ 0.005959] Disabled fast string operations [ 0.005964] CPU: Physical Processor ID: 0 [ 0.005966] CPU: Processor Core ID: 0 [ 0.005968] mce: CPU supports 6 MCE banks [ 0.005976] CPU0: Thermal monitoring enabled (TM2) [ 0.005979] process: using mwait in idle threads [ 0.005984] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.005986] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.006435] Freeing SMP alternatives memory: 40K (ffffffff89027000 - ffffffff89031000) [ 0.008414] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.019000] APIC calibration not consistent with PM-Timer: 119ms instead of 100ms [ 0.019000] APIC delta adjusted to PM-Timer: 1246873 (1496016) [ 0.019000] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (family: 0x6, model: 0xf, stepping: 0xd) [ 0.019000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. [ 0.019000] perf_event_intel: PEBS disabled due to CPU errata [ 0.019000] ... version: 2 [ 0.019000] ... bit width: 40 [ 0.019000] ... generic registers: 2 [ 0.019000] ... value mask: 000000ffffffffff [ 0.019000] ... max period: 000000007fffffff [ 0.019000] ... fixed-purpose events: 3 [ 0.019000] ... event mask: 0000000700000003 [ 0.020097] x86: Booting SMP configuration: [ 0.020100] .... node #0, CPUs: #1 [ 0.021044] x86: Booted up 1 node, 2 CPUs [ 0.021048] smpboot: Total of 2 processors activated (7181.68 BogoMIPS) [ 0.022102] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.022171] devtmpfs: initialized [ 0.022308] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.022308] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.022308] xor: measuring software checksum speed [ 0.031709] prefetch64-sse: 7172.000 MB/sec [ 0.041709] generic_sse: 6360.000 MB/sec [ 0.041711] xor: using function: prefetch64-sse (7172.000 MB/sec) [ 0.041720] pinctrl core: initialized pinctrl subsystem [ 0.042001] NET: Registered protocol family 16 [ 0.046023] cpuidle: using governor ladder [ 0.050006] cpuidle: using governor menu [ 0.050155] ACPI: bus type PCI registered [ 0.050257] dca service started, version 1.12.1 [ 0.050274] PCI: Using configuration type 1 for base access [ 0.074023] raid6: sse2x1 gen() 3183 MB/s [ 0.091004] raid6: sse2x1 xor() 3052 MB/s [ 0.108019] raid6: sse2x2 gen() 3300 MB/s [ 0.125006] raid6: sse2x2 xor() 3718 MB/s [ 0.142005] raid6: sse2x4 gen() 5320 MB/s [ 0.159007] raid6: sse2x4 xor() 4255 MB/s [ 0.159009] raid6: using algorithm sse2x4 gen() 5320 MB/s [ 0.159011] raid6: .... xor() 4255 MB/s, rmw enabled [ 0.159013] raid6: using ssse3x2 recovery algorithm [ 0.159207] ACPI: Added _OSI(Module Device) [ 0.159210] ACPI: Added _OSI(Processor Device) [ 0.159212] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.159214] ACPI: Added _OSI(Processor Aggregator Device) [ 0.161749] ACPI: Executed 1 blocks of module-level executable AML code [ 0.164394] ACPI: Interpreter enabled [ 0.164403] ACPI: (supports S0 S5) [ 0.164406] ACPI: Using IOAPIC for interrupt routing [ 0.164454] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.172153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.172162] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.172169] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.172289] PCI host bridge to bus 0000:00 [ 0.172294] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.172297] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.172300] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.172302] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.172305] pci_bus 0000:00: root bus resource [mem 0x7ff00000-0xffffffff window] [ 0.172308] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.172321] pci 0000:00:00.0: [8086:2990] type 00 class 0x060000 [ 0.172457] pci 0000:00:02.0: [8086:2992] type 00 class 0x030000 [ 0.172475] pci 0000:00:02.0: reg 0x10: [mem 0xffa00000-0xffafffff] [ 0.172489] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.172496] pci 0000:00:02.0: reg 0x20: [io 0xec00-0xec07] [ 0.172641] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 [ 0.172686] pci 0000:00:1a.0: reg 0x20: [io 0xe000-0xe01f] [ 0.172808] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 [ 0.172854] pci 0000:00:1a.1: reg 0x20: [io 0xdc00-0xdc1f] [ 0.172982] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 [ 0.173016] pci 0000:00:1a.7: reg 0x10: [mem 0xff9fb400-0xff9fb7ff] [ 0.173094] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.173200] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 [ 0.173228] pci 0000:00:1b.0: reg 0x10: [mem 0xff9f4000-0xff9f7fff 64bit] [ 0.173290] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.173388] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 [ 0.173459] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.173560] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 [ 0.173630] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.173734] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 [ 0.173779] pci 0000:00:1d.0: reg 0x20: [io 0xd880-0xd89f] [ 0.173896] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 [ 0.173941] pci 0000:00:1d.1: reg 0x20: [io 0xd800-0xd81f] [ 0.174068] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 [ 0.174113] pci 0000:00:1d.2: reg 0x20: [io 0xd480-0xd49f] [ 0.174240] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 [ 0.174268] pci 0000:00:1d.7: reg 0x10: [mem 0xff9fb000-0xff9fb3ff] [ 0.174345] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.174445] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.174589] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100 [ 0.174683] pci 0000:00:1f.0: can't claim BAR 7 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815] [ 0.174689] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.174693] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.174819] pci 0000:00:1f.2: [8086:2821] type 00 class 0x010601 [ 0.174845] pci 0000:00:1f.2: reg 0x10: [io 0xe880-0xe887] [ 0.174854] pci 0000:00:1f.2: reg 0x14: [io 0xe800-0xe803] [ 0.174863] pci 0000:00:1f.2: reg 0x18: [io 0xe480-0xe487] [ 0.174871] pci 0000:00:1f.2: reg 0x1c: [io 0xe400-0xe403] [ 0.174880] pci 0000:00:1f.2: reg 0x20: [io 0xe080-0xe09f] [ 0.174889] pci 0000:00:1f.2: reg 0x24: [mem 0xff9fb800-0xff9fbfff] [ 0.174924] pci 0000:00:1f.2: PME# supported from D3hot [ 0.175032] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 [ 0.175048] pci 0000:00:1f.3: reg 0x10: [mem 0xff9fac00-0xff9facff] [ 0.175077] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.175260] pci 0000:01:00.0: [11ab:4362] type 00 class 0x020000 [ 0.175304] pci 0000:01:00.0: reg 0x10: [mem 0xff6fc000-0xff6fffff 64bit] [ 0.175317] pci 0000:01:00.0: reg 0x18: [io 0xb800-0xb8ff] [ 0.175362] pci 0000:01:00.0: reg 0x30: [mem 0xff6c0000-0xff6dffff pref] [ 0.175412] pci 0000:01:00.0: supports D1 D2 [ 0.175414] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175469] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.175482] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.175487] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] [ 0.175492] pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff6fffff] [ 0.175572] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000 [ 0.175615] pci 0000:02:00.0: reg 0x10: [mem 0xff7fc000-0xff7fffff 64bit] [ 0.175629] pci 0000:02:00.0: reg 0x18: [io 0xc800-0xc8ff] [ 0.175674] pci 0000:02:00.0: reg 0x30: [mem 0xff7c0000-0xff7dffff pref] [ 0.175723] pci 0000:02:00.0: supports D1 D2 [ 0.175725] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.175781] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.175792] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.175797] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.175801] pci 0000:00:1c.1: bridge window [mem 0xff700000-0xff7fffff] [ 0.175890] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.175901] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.175903] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.175906] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.175909] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.175911] pci 0000:00:1e.0: bridge window [mem 0x7ff00000-0xffffffff window] (subtractive decode) [ 0.175929] pci_bus 0000:00: on NUMA node 0 [ 0.176940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.177019] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.177087] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.177154] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.177221] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.177289] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.177356] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.177422] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.177490] ACPI: Enabled 2 GPEs in block 00 to 1F [ 0.177684] SCSI subsystem initialized [ 0.177710] libata version 3.00 loaded. [ 0.177719] ACPI: bus type USB registered [ 0.177764] usbcore: registered new interface driver usbfs [ 0.177783] usbcore: registered new interface driver hub [ 0.177803] usbcore: registered new device driver usb [ 0.177849] pps_core: LinuxPPS API ver. 1 registered [ 0.177851] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.177861] PTP clock support registered [ 0.178046] Advanced Linux Sound Architecture Driver Initialized. [ 0.178065] PCI: Using ACPI for IRQ routing [ 0.178069] PCI: pci_cache_line_size set to 64 bytes [ 0.178124] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.178127] e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff] [ 0.178132] e820: reserve RAM buffer [mem 0x7feb0000-0x7fffffff] [ 0.178339] Bluetooth: Core ver 2.21 [ 0.178356] NET: Registered protocol family 31 [ 0.178358] Bluetooth: HCI device and connection manager initialized [ 0.178362] Bluetooth: HCI socket layer initialized [ 0.178365] Bluetooth: L2CAP socket layer initialized [ 0.178374] Bluetooth: SCO socket layer initialized [ 0.178475] clocksource: Switched to clocksource refined-jiffies [ 0.178475] FS-Cache: Loaded [ 0.178475] pnp: PnP ACPI init [ 0.178475] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.178475] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.178510] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.179002] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.179126] pnp 00:03: [dma 0 disabled] [ 0.180000] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.180041] pnp 00:04: [dma 0 disabled] [ 0.180140] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.180511] system 00:05: [io 0x0a00-0x0a0f] has been reserved [ 0.180515] system 00:05: [io 0x0a10-0x0a1f] has been reserved [ 0.180520] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.180677] system 00:06: [io 0x04d0-0x04d1] has been reserved [ 0.180681] system 00:06: [io 0x0800-0x087f] could not be reserved [ 0.180684] system 00:06: [io 0x0480-0x04bf] has been reserved [ 0.180687] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.180690] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.180695] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181011] system 00:07: [mem 0xffc00000-0xffefffff] has been reserved [ 0.181011] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181023] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.181023] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.181023] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181072] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.181077] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.181308] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.181312] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.181315] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.181318] system 00:0a: [mem 0x00100000-0x7fefffff] could not be reserved [ 0.181322] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.181471] pnp: PnP ACPI: found 11 devices [ 0.189177] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.189192] clocksource: Switched to clocksource acpi_pm [ 0.189192] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.189192] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.189192] pci 0000:00:1f.0: BAR 7: [io size 0x0080] has bogus alignment [ 0.189192] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.189192] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.189192] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.189192] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.189192] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.189192] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref] [ 0.189192] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.189192] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff] [ 0.189192] pci 0000:00:1c.0: bridge window [mem 0xff600000-0xff6fffff] [ 0.189192] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.189192] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.189192] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.189192] pci 0000:00:1c.1: bridge window [mem 0xff700000-0xff7fffff] [ 0.189192] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref] [ 0.189192] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.189192] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.189192] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.189192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.189192] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.189192] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xffffffff window] [ 0.189192] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.189192] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff] [ 0.189192] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.189192] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.189192] pci_bus 0000:02: resource 1 [mem 0xff700000-0xff7fffff] [ 0.189192] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref] [ 0.189192] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.189192] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.189192] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.189192] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.189192] pci_bus 0000:03: resource 8 [mem 0x7ff00000-0xffffffff window] [ 0.189234] NET: Registered protocol family 2 [ 0.189432] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.189482] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.189587] TCP: Hash tables configured (established 16384 bind 16384) [ 0.189645] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.189659] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.189736] NET: Registered protocol family 1 [ 0.189865] RPC: Registered named UNIX socket transport module. [ 0.189868] RPC: Registered udp transport module. [ 0.189869] RPC: Registered tcp transport module. [ 0.189871] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.189889] pci 0000:00:02.0: Video device with shadowed ROM [ 1.290034] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 1.290778] PCI: CLS 32 bytes, default 64 [ 1.290850] Unpacking initramfs... [ 2.221654] Freeing initrd memory: 4208K (ffff88007fa94000 - ffff88007feb0000) [ 2.242705] NFS: Registering the id_resolver key type [ 2.242717] Key type id_resolver registered [ 2.242719] Key type id_legacy registered [ 2.242725] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 2.267153] Key type cifs.spnego registered [ 2.267165] Key type cifs.idmap registered [ 2.267251] fuse init (API version 7.23) [ 2.278083] NET: Registered protocol family 38 [ 2.278096] async_tx: api initialized (async) [ 2.278201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.279950] io scheduler noop registered [ 2.279956] io scheduler deadline registered [ 2.280075] io scheduler cfq registered (default) [ 2.280177] io scheduler bfq registered [ 2.280179] BFQ I/O-scheduler: v7r11 [ 2.280242] gpio_it87: no device [ 2.283946] intel_idle: does not run on family 6 model 15 [ 2.284077] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.284082] ACPI: Power Button [PWRB] [ 2.284152] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.284156] ACPI: Power Button [PWRF] [ 2.291545] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 2.291742] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.312306] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.332948] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.333500] Linux agpgart interface v0.103 [ 2.333556] agpgart-intel 0000:00:00.0: Intel 965Q Chipset [ 2.333583] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 2.333846] agpgart-intel 0000:00:00.0: detected 1024K stolen memory [ 2.333963] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.334047] [drm] Initialized drm 1.1.0 20060810 [ 2.334820] [drm] Memory usable by graphics device = 512M [ 2.334825] [drm] Replacing VGA console driver [ 2.335651] Console: switching to colour dummy device 80x25 [ 2.341244] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.341248] [drm] Driver supports precise vblank timestamp query. [ 2.350833] [drm] initialized overlay support [ 2.350916] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 2.360037] loop: module loaded [ 2.360421] gpio_ich: GPIO from 462 to 511 on gpio_ich [ 2.360572] mpt3sas version 12.100.00.00 loaded [ 2.360956] ahci 0000:00:1f.2: version 3.0 [ 2.361261] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.361299] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.361304] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs [ 2.378443] scsi host0: ahci [ 2.380593] scsi host1: ahci [ 2.382668] scsi host2: ahci [ 2.384677] scsi host3: ahci [ 2.388781] scsi host4: ahci [ 2.390778] scsi host5: ahci [ 2.390882] ata1: SATA max UDMA/133 abar m2048@0xff9fb800 port 0xff9fb900 irq 25 [ 2.390887] ata2: SATA max UDMA/133 abar m2048@0xff9fb800 port 0xff9fb980 irq 25 [ 2.390890] ata3: SATA max UDMA/133 abar m2048@0xff9fb800 port 0xff9fba00 irq 25 [ 2.390892] ata4: SATA max UDMA/133 abar m2048@0xff9fb800 port 0xff9fba80 irq 25 [ 2.390895] ata5: SATA max UDMA/133 abar m2048@0xff9fb800 port 0xff9fbb00 irq 25 [ 2.390898] ata6: SATA max UDMA/133 abar m2048@0xff9fb800 port 0xff9fbb80 irq 25 [ 2.391295] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 2.392025] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 2.392053] tun: Universal TUN/TAP device driver, 1.6 [ 2.392055] tun: (C) 1999-2004 Max Krasnyansky [ 2.392139] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.392141] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.392177] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 2.392179] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.392207] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k [ 2.392209] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.392237] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.1.3 [ 2.392239] Copyright(c) 1999 - 2017 Intel Corporation. [ 2.392309] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.0.26 [ 2.392312] i40e: Copyright(c) 2013 - 2017 Intel Corporation. [ 2.392376] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10) [ 2.393268] sk98lin: Network Device Driver v10.93.3.3 (C)Copyright 1999-2012 Marvell(R). [ 2.448181] eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller [ 2.503184] eth1: Marvell Yukon 88E8053 Gigabit Ethernet Controller [ 2.503225] Fusion MPT base driver 3.04.20 [ 2.503227] Copyright (c) 1999-2008 LSI Corporation [ 2.503238] Fusion MPT SAS Host driver 3.04.20 [ 2.503283] Fusion MPT misc device (ioctl) driver 3.04.20 [ 2.505209] mptctl: Registered with Fusion MPT base driver [ 2.505213] mptctl: /dev/mptctl @ (major,minor=10,220) [ 2.505224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.505234] ehci-pci: EHCI PCI platform driver [ 2.505426] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 2.505440] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.505456] ehci-pci 0000:00:1a.7: debug port 1 [ 2.509365] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported [ 2.509385] ehci-pci 0000:00:1a.7: irq 18, io mem 0xff9fb400 [ 2.515033] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.515361] hub 1-0:1.0: USB hub found [ 2.515374] hub 1-0:1.0: 4 ports detected [ 2.515701] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 2.515714] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.515729] ehci-pci 0000:00:1d.7: debug port 1 [ 2.519649] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 2.519668] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff9fb000 [ 2.525085] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.525417] hub 2-0:1.0: USB hub found [ 2.525430] hub 2-0:1.0: 6 ports detected [ 2.525678] uhci_hcd: USB Universal Host Controller Interface driver [ 2.525825] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.525837] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.525845] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.525880] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 2.526160] hub 3-0:1.0: USB hub found [ 2.526172] hub 3-0:1.0: 2 ports detected [ 2.526411] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.526422] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.526430] uhci_hcd 0000:00:1a.1: detected 2 ports [ 2.526459] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00 [ 2.526705] hub 4-0:1.0: USB hub found [ 2.526716] hub 4-0:1.0: 2 ports detected [ 2.526960] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.526971] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.526979] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.527001] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 [ 2.527248] hub 5-0:1.0: USB hub found [ 2.527260] hub 5-0:1.0: 2 ports detected [ 2.527480] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.527491] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.527502] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.527532] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 [ 2.527773] hub 6-0:1.0: USB hub found [ 2.527785] hub 6-0:1.0: 2 ports detected [ 2.528045] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.528058] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.528066] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.528087] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 [ 2.528327] hub 7-0:1.0: USB hub found [ 2.528338] hub 7-0:1.0: 2 ports detected [ 2.528576] usbcore: registered new interface driver usblp [ 2.528625] usbcore: registered new interface driver usb-storage [ 2.528685] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.528687] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.529387] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.530621] rtc_cmos 00:01: RTC can wake from S4 [ 2.530822] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.530851] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram [ 2.530872] i2c /dev entries driver [ 2.536978] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 2.543104] coretemp coretemp.0: Using relative temperature scale! [ 2.543122] coretemp coretemp.0: Using relative temperature scale! [ 2.543254] w83627ehf: Found W83627DHG chip at 0xa10 [ 2.543702] md: raid0 personality registered for level 0 [ 2.543706] md: raid1 personality registered for level 1 [ 2.543709] md: raid10 personality registered for level 10 [ 2.551432] md: raid6 personality registered for level 6 [ 2.551437] md: raid5 personality registered for level 5 [ 2.551439] md: raid4 personality registered for level 4 [ 2.551637] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.554253] usbcore: registered new interface driver btusb [ 2.554334] usbcore: registered new interface driver usbhid [ 2.554336] usbhid: USB HID core driver [ 2.554652] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.554945] NET: Registered protocol family 10 [ 2.562790] hdaudio hdaudioC0D0: Unable to bind the codec [ 2.562987] NET: Registered protocol family 17 [ 2.563025] 8021q: 802.1Q VLAN Support v1.8 [ 2.563042] Key type dns_resolver registered [ 2.563279] readynas_io_init: initializing ReadyNAS I/O. [ 2.563280] procfs_init: initializing ReadyNAS procfs. [ 2.563287] ReadyNAS model: To Be Filled By O.E.M. [ 2.563305] pwr_button_state_init: initializing ReadyNAS PWR button state handler . [ 2.563311] button_init: initializing ReadyNAS button set. [ 2.563313] __button_init: button 'backup' gpio_ich:15 (POLL) [ 2.563326] __button_init: button 'reset' gpio_ich:8 (POLL) [ 2.568756] input: rn_button as /devices/virtual/input/input3 [ 2.568820] readynas_io_init: initialization successfully completed. [ 2.568918] readynas_lcd_init: installing ReadyNAS LCD driver. [ 2.569070] readynas_led_init: installing ReadyNAS LED driver. [ 2.570132] register_led: registering LED "readynas:green:backup" [ 2.570342] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3 [ 2.570353] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3 [ 2.570439] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 2.570678] registered taskstats version 1 [ 2.578382] Btrfs loaded, crc32c=crc32c-generic [ 2.584433] rtc_cmos 00:01: setting system clock to 2017-12-18 17:57:43 UTC (1513619863) [ 2.584544] ALSA device list: [ 2.584547] #0: HDA Intel at 0xff9f4000 irq 26 [ 2.696043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.696595] ata1.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133 [ 2.696605] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.697172] ata1.00: configured for UDMA/133 [ 2.697391] scsi 0:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 0A80 PQ: 0 ANSI: 5 [ 2.697678] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 2.697681] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.697687] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.697744] sd 0:0:0:0: [sda] Write Protect is off [ 2.697748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.697809] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.754324] sda: sda1 sda2 sda3 [ 2.754802] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.827035] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.943146] usb-storage 2-1:1.0: USB Mass Storage device detected [ 2.943229] scsi host6: usb-storage 2-1:1.0 [ 3.002043] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.002578] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 3.002584] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.003146] ata2.00: configured for UDMA/133 [ 3.003366] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5 [ 3.003652] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.003656] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.003670] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.003720] sd 1:0:0:0: [sdb] Write Protect is off [ 3.003724] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.003772] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.080568] sdb: sdb1 sdb2 sdb3 [ 3.081055] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.224091] tsc: Refined TSC clocksource calibration: 1795.499 MHz [ 3.224100] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e18da41a2, max_idle_ns: 440795250832 ns [ 3.308042] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.308593] ata3.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 3.308597] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.309160] ata3.00: configured for UDMA/133 [ 3.309380] scsi 2:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5 [ 3.309644] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.309648] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 3.309699] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.309712] sd 2:0:0:0: [sdc] Write Protect is off [ 3.309716] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.309744] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.353800] sdc: sdc1 sdc2 sdc3 [ 3.354298] sd 2:0:0:0: [sdc] Attached SCSI disk [ 3.614043] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.614583] ata4.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 3.614593] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.615162] ata4.00: configured for UDMA/133 [ 3.615384] scsi 3:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5 [ 3.615683] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.615687] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 3.615690] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 3.615750] sd 3:0:0:0: [sdd] Write Protect is off [ 3.615754] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.615782] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.654489] sdd: sdd1 sdd2 sdd3 [ 3.654969] sd 3:0:0:0: [sdd] Attached SCSI disk [ 3.920044] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.920577] ata5.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 3.920582] ata5.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.921136] ata5.00: configured for UDMA/133 [ 3.921355] scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5 [ 3.921615] sd 4:0:0:0: [sde] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 3.921619] sd 4:0:0:0: [sde] 4096-byte physical blocks [ 3.921671] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 3.921685] sd 4:0:0:0: [sde] Write Protect is off [ 3.921688] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.921717] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.971445] sde: sde1 sde2 sde3 [ 3.971925] sd 4:0:0:0: [sde] Attached SCSI disk [ 4.224157] clocksource: Switched to clocksource tsc [ 4.226046] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.226571] ata6.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133 [ 4.226576] ata6.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.227117] ata6.00: configured for UDMA/133 [ 4.227299] scsi 5:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A80 PQ: 0 ANSI: 5 [ 4.227530] sd 5:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB) [ 4.227533] sd 5:0:0:0: [sdf] 4096-byte physical blocks [ 4.227587] sd 5:0:0:0: [sdf] Write Protect is off [ 4.227591] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 4.227609] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 4.227615] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.279259] sdf: sdf1 sdf2 sdf3 [ 4.279709] sd 5:0:0:0: [sdf] Attached SCSI disk [ 4.280315] Freeing unused kernel memory: 852K (ffffffff88f52000 - ffffffff89027000) [ 4.284698] vpd: module license 'Proprietary' taints kernel. [ 4.284703] Disabling lock debugging due to kernel taint [ 4.284842] ReadyNAS VPD init [ 7.852050] nv6lcd v3.1 loaded. [ 7.952999] scsi 6:0:0:0: Direct-Access SMI USB DISK 1100 PQ: 0 ANSI: 0 CCS [ 7.953378] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 7.953383] sd 6:0:0:0: Embedded Enclosure Device [ 7.954514] sd 6:0:0:0: Wrong diagnostic page; asked for 1 got 0 [ 7.960554] sd 6:0:0:0: Failed to get diagnostic page 0xffffffea [ 7.966568] sd 6:0:0:0: Failed to bind enclosure -19 [ 7.971569] sd 6:0:0:0: [sdg] 244736 512-byte logical blocks: (125 MB/120 MiB) [ 7.972481] sd 6:0:0:0: [sdg] Write Protect is off [ 7.972487] sd 6:0:0:0: [sdg] Mode Sense: 43 00 00 00 [ 7.973357] sd 6:0:0:0: [sdg] No Caching mode page found [ 7.978684] sd 6:0:0:0: [sdg] Assuming drive cache: write through [ 7.988862] random: nonblocking pool is initialized [ 7.988863] sdg: sdg1 [ 7.991115] sd 6:0:0:0: [sdg] Attached SCSI removable disk [ 20.566208] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 20.569123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.774007] eth0: network connection up using port A [ 23.774007] interrupt src: MSI [ 23.774007] speed: 1000 [ 23.774007] autonegotiation: yes [ 23.774007] duplex mode: full [ 23.774007] flowctrl: symmetric [ 23.774007] role: slave [ 23.774007] tcp offload: enabled [ 23.774007] scatter-gather: enabled [ 23.774007] tx-checksum: enabled [ 23.774007] rx-checksum: enabled [ 23.774007] rx-polling: enabled [ 23.774007] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.670541] md: md0 stopped. [ 29.672154] md: bind [ 29.672300] md: bind [ 29.672439] md: bind [ 29.672579] md: bind [ 29.672738] md: bind [ 29.673043] md: bind [ 29.674926] md/raid1:md0: active with 6 out of 6 mirrors [ 29.674995] md0: detected capacity change from 0 to 4290772992 [ 29.698837] md: md1 stopped. [ 29.700193] md: bind [ 29.700345] md: bind [ 29.700485] md: bind [ 29.700639] md: bind [ 29.700801] md: bind [ 29.700958] md: bind [ 29.701739] md/raid:md1: device sda2 operational as raid disk 0 [ 29.701743] md/raid:md1: device sdf2 operational as raid disk 5 [ 29.701745] md/raid:md1: device sde2 operational as raid disk 4 [ 29.701747] md/raid:md1: device sdd2 operational as raid disk 3 [ 29.701749] md/raid:md1: device sdc2 operational as raid disk 2 [ 29.701751] md/raid:md1: device sdb2 operational as raid disk 1 [ 29.702468] md/raid:md1: allocated 6474kB [ 29.702524] md/raid:md1: raid level 6 active with 6 out of 6 devices, algorithm 2 [ 29.702526] RAID conf printout: [ 29.702528] --- level:6 rd:6 wd:6 [ 29.702530] disk 0, o:1, dev:sda2 [ 29.702532] disk 1, o:1, dev:sdb2 [ 29.702534] disk 2, o:1, dev:sdc2 [ 29.702536] disk 3, o:1, dev:sdd2 [ 29.702538] disk 4, o:1, dev:sde2 [ 29.702540] disk 5, o:1, dev:sdf2 [ 29.702634] md1: detected capacity change from 0 to 2145124352 [ 30.131448] BTRFS: device label 33ea2307:root devid 1 transid 92179 /dev/md0 [ 30.131892] BTRFS info (device md0): has skinny extents [ 30.220667] BTRFS info (device md0): checking UUID tree [ 31.259686] systemd[1]: Failed to insert module 'kdbus': Function not implemented [ 31.267773] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 31.267987] systemd[1]: Detected architecture x86-64. [ 31.272135] systemd[1]: Set hostname to . [ 31.383174] systemd[1]: local-fs.target: Found ordering cycle on local-fs.target/start [ 31.383183] systemd[1]: local-fs.target: Found dependency on home-dropbox_backup-Dropbox-NAS-data-Backup.mount/start [ 31.383187] systemd[1]: local-fs.target: Found dependency on home.mount/start [ 31.383191] systemd[1]: local-fs.target: Found dependency on local-fs.target/start [ 31.383195] systemd[1]: local-fs.target: Breaking ordering cycle by deleting job home-dropbox_backup-Dropbox-NAS-data-Backup.mount/start [ 31.383200] systemd[1]: home-dropbox_backup-Dropbox-NAS-data-Backup.mount: Job home-dropbox_backup-Dropbox-NAS-data-Backup.mount/start deleted to break ordering cycle starting with local-fs.target/start [ 31.392881] systemd[1]: Listening on udev Kernel Socket. [ 31.407899] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 31.415386] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 31.424195] systemd[1]: Created slice System Slice. [ 31.430190] systemd[1]: Listening on Journal Socket. [ 31.443251] systemd[1]: Started ReadyNAS LCD splasher. [ 31.457264] systemd[1]: Starting Load Kernel Modules... [ 31.463069] systemd[1]: Mounting Debug File System... [ 31.468245] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 31.482185] systemd[1]: Mounting POSIX Message Queue File System... [ 31.489002] systemd[1]: Starting Remount Root and Kernel File Systems... [ 31.500057] systemd[1]: Mounting RPC Pipe File System... [ 31.504235] systemd[1]: Listening on Journal Socket (/dev/log). [ 31.515346] systemd[1]: Starting Journal Service... [ 31.520257] systemd[1]: Created slice User and Session Slice. [ 31.532171] systemd[1]: Mounting RPC Pipe File System... [ 31.540174] systemd[1]: Listening on udev Control Socket. [ 31.546158] systemd[1]: Reached target Encrypted Volumes. [ 31.552302] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 31.561236] systemd[1]: Created slice system-getty.slice. [ 31.567226] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 31.576137] systemd[1]: Reached target Paths. [ 31.585197] systemd[1]: Starting MD arrays... [ 31.590246] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 31.601268] systemd[1]: Starting ReadyNASOS system prep... [ 31.606132] systemd[1]: Reached target Slices. [ 31.614137] systemd[1]: Mounted RPC Pipe File System. [ 31.620152] systemd[1]: Mounted RPC Pipe File System. [ 31.627236] systemd[1]: Mounted Debug File System. [ 31.632257] systemd[1]: Mounted POSIX Message Queue File System. [ 31.638485] systemd[1]: Started Load Kernel Modules. [ 31.644530] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 31.653505] systemd[1]: Started Remount Root and Kernel File Systems. [ 31.661655] systemd[1]: Started ReadyNASOS system prep. [ 31.676320] systemd[1]: Starting Load/Save Random Seed... [ 31.693392] systemd-journald[1410]: File /var/log/journal/45060203af7247649ec7e27a0e30d820/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 31.701306] systemd[1]: Starting Rebuild Hardware Database... [ 31.707136] systemd[1]: Starting Create Static Device Nodes in /dev... [ 31.718170] systemd[1]: Mounting FUSE Control File System... [ 31.725188] systemd[1]: Starting Apply Kernel Variables... [ 31.731048] systemd[1]: Mounting Configuration File System... [ 31.745982] systemd[1]: Mounted Configuration File System. [ 31.752316] systemd[1]: Mounted FUSE Control File System. [ 31.758454] systemd[1]: Started Load/Save Random Seed. [ 31.764533] systemd[1]: Started Apply Kernel Variables. [ 31.828998] systemd[1]: Started Create Static Device Nodes in /dev. [ 31.842239] systemd[1]: Starting udev Kernel Device Manager... [ 31.902675] systemd[1]: Started udev Kernel Device Manager. [ 32.009460] systemd[1]: Started Rebuild Hardware Database. [ 32.066392] systemd[1]: Started Journal Service. [ 32.100380] systemd-journald[1410]: Received request to flush runtime journal from PID 1 [ 32.340252] md: md127 stopped. [ 32.341418] md: bind [ 32.341560] md: bind [ 32.341695] md: bind [ 32.341821] md: bind [ 32.341942] md: bind [ 32.342249] md: bind [ 32.343433] md/raid:md127: device sda3 operational as raid disk 0 [ 32.343438] md/raid:md127: device sdf3 operational as raid disk 5 [ 32.343440] md/raid:md127: device sde3 operational as raid disk 4 [ 32.343442] md/raid:md127: device sdd3 operational as raid disk 3 [ 32.343444] md/raid:md127: device sdc3 operational as raid disk 2 [ 32.343446] md/raid:md127: device sdb3 operational as raid disk 1 [ 32.344093] md/raid:md127: allocated 6474kB [ 32.344519] md/raid:md127: raid level 5 active with 6 out of 6 devices, algorithm 2 [ 32.344523] RAID conf printout: [ 32.344525] --- level:5 rd:6 wd:6 [ 32.344527] disk 0, o:1, dev:sda3 [ 32.344531] disk 1, o:1, dev:sdb3 [ 32.344533] disk 2, o:1, dev:sdc3 [ 32.344535] disk 3, o:1, dev:sdd3 [ 32.344537] disk 4, o:1, dev:sde3 [ 32.344539] disk 5, o:1, dev:sdf3 [ 32.344646] md127: detected capacity change from 0 to 14978134179840 [ 32.788303] Adding 2094844k swap on /dev/md1. Priority:-1 extents:1 across:2094844k [ 32.804598] BTRFS: device label 33ea2307:data devid 1 transid 210996 /dev/md127 [ 33.000722] BTRFS info (device md127): has skinny extents [ 34.638041] eth0: network connection down [ 34.808502] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 38.178419] eth0: network connection up using port A [ 38.178419] interrupt src: MSI [ 38.178419] speed: 1000 [ 38.178419] autonegotiation: yes [ 38.178419] duplex mode: full [ 38.178419] flowctrl: symmetric [ 38.178419] role: slave [ 38.178419] tcp offload: enabled [ 38.178419] scatter-gather: enabled [ 38.178419] tx-checksum: enabled [ 38.178419] rx-checksum: enabled [ 38.178419] rx-polling: enabled [ 38.178419] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 44.709762] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 44.709791] NFSD: starting 90-second grace period (net ffffffff88f07bc0) [ 400.057037] INFO: task mount:1482 blocked for more than 200 seconds. [ 400.057043] Tainted: P O 4.4.79.x86_64.1 #1 [ 400.057045] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 400.057047] mount D ffff880078f9f858 0 1482 1 0x00000000 [ 400.057053] ffff880078f9f858 ffff88007c0ed400 ffff880078fa0000 ffff880078fcf1f0 [ 400.057057] ffff880078fcf000 ffff880078fcf1f0 0000000000000001 ffff880078f9f870 [ 400.057060] ffffffff88a55710 ffff8800646341b8 ffff880078f9f8b8 ffffffff882f1f55 [ 400.057063] Call Trace: [ 400.057072] [] schedule+0x30/0x80 [ 400.057077] [] wait_current_trans.isra.22+0x95/0xf0 [ 400.057081] [] ? wait_woken+0x80/0x80 [ 400.057084] [] start_transaction+0x2f8/0x440 [ 400.057087] [] btrfs_start_transaction+0x19/0x20 [ 400.057091] [] btrfs_drop_snapshot+0x4f1/0x860 [ 400.057094] [] ? btrfs_commit_transaction.part.25+0xa57/0xa80 [ 400.057098] [] merge_reloc_roots+0xd7/0x220 [ 400.057101] [] btrfs_recover_relocation+0x35e/0x3b0 [ 400.057104] [] open_ctree+0x2201/0x25a0 [ 400.057107] [] ? vsnprintf+0x115/0x510 [ 400.057111] [] btrfs_mount+0x9d4/0xb50 [ 400.057115] [] ? find_next_bit+0x15/0x20 [ 400.057118] [] mount_fs+0x33/0x160 [ 400.057122] [] ? __alloc_percpu+0x10/0x20 [ 400.057126] [] vfs_kern_mount+0x62/0x100 [ 400.057129] [] btrfs_mount+0x1cf/0xb50 [ 400.057132] [] ? find_next_bit+0x15/0x20 [ 400.057134] [] ? pcpu_alloc+0x33f/0x630 [ 400.057137] [] mount_fs+0x33/0x160 [ 400.057140] [] ? __alloc_percpu+0x10/0x20 [ 400.057142] [] vfs_kern_mount+0x62/0x100 [ 400.057145] [] do_mount+0x208/0xd20 [ 400.057149] [] ? __kmalloc_track_caller+0x25/0x190 [ 400.057152] [] ? strndup_user+0x3c/0x90 [ 400.057154] [] SyS_mount+0x6a/0xb0 [ 400.057158] [] entry_SYSCALL_64_fastpath+0x12/0x6a [ 400.057172] INFO: task readynasd:3117 blocked for more than 200 seconds. [ 400.057174] Tainted: P O 4.4.79.x86_64.1 #1 [ 400.057176] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 400.057177] readynasd D ffff880069523e38 0 3117 1 0x00000000 [ 400.057181] ffff880069523e38 ffff880069665e80 ffff880069524000 ffff880078fce870 [ 400.057184] 0000000000000000 ffffffff88169ec0 ffff880078fce870 ffff880069523e50 [ 400.057188] ffffffff88a55710 ffff880069665e80 ffff880069523ea0 ffffffff88a57554 [ 400.057191] Call Trace: [ 400.057195] [] ? SyS_tee+0x3c0/0x3c0 [ 400.057198] [] schedule+0x30/0x80 [ 400.057201] [] rwsem_down_read_failed+0xd4/0x110 [ 400.057204] [] ? sync_inodes_sb+0x178/0x1c0 [ 400.057207] [] call_rwsem_down_read_failed+0x14/0x30 [ 400.057211] [] ? btrfs_put_ordered_extent+0x11/0x80 [ 400.057213] [] ? down_read+0x12/0x20 [ 400.057216] [] iterate_supers+0x8e/0xf0 [ 400.057219] [] sys_sync+0x30/0x90 [ 400.057222] [] entry_SYSCALL_64_fastpath+0x12/0x6a